Cold Storage Rooms

 

Polyurethane Sandwich Panel Cold Room

 

Cold Room Modula Polyurethane Panel

 

Spray Polyurethane Foam Cold Storage

 

Mortuary Refrigerators and Freezers

 

Cold Storage Doors

 

Deep Freezer

 

Cold Storage Room Construction Installation Building

Reefer containers
Refrigerated containers Refrireration containers Freezer storage container Fridge containers

Cryogenic
Therapy Chamber
Whole Body Cryotherapy
Cryo Chamber
Cryogenic
Chamber Therapy
Cryogenic systems


Reefer containers


Refrigerated containers


  • 1.Insulation:
    Polyurethane(100mm)
    2.Door: Overlap Insulated door
    3.Bottom: Polyurethane foam(100 mm)
    4.Walls: Polyurethane foam(100 mm), Galvanized   zinc alloy 0.8T
    5.The frigeration machinery

  • 1.O
    rders
    2.Design
    3.Hardware work
    4.Exterior Painting work
    5.Internal polyurethane foam construction   (100mm)
    6.Internal galvanized steel finishing (0.8T)
    7.The frigeration machinery installation
    8.Commissioning
    9.Shipment
  • Refrigerated containers
     
    Selecting the storage conditions for the agricultural products, and providing information of data when using warehouse.
    Technical advice for a perfect maintenance of warehouse.

    Features for Refrigerated container
     
    Adopting a high-performance of electrical control system, it gives a stability and excellent energy saving efficiency
     
    Minimizing the failure of electrical control system and blocking the error in the early stage
    Wide range of Temperature control(+20 C, -25 C), Easy operating. 

    For exterior, it was used CO2 welding on the Chrome steel plate for the bottom seams

    As the sizes are small like 16.5 m2 ( 177 ft2 ) and 33 m2 ( 355 ft2 ), outstanding mobility and efficiency, excellent affordability than steel structures.

     
    Outstanding safety, durability and convenient transportation as it is the light and durable FRP container type.


    There is no need to repaint at all comparing to the needs repainting in case of steel structures after 2 years of using(corrosion occurred)

     

    Structure system for Refrigerated container type

    Door lock device
    Made of stainless steel to prevent rust and increase a durability 

    Interior finishing
    Galvanized steel work for preventing from corrosion
     

    Overlap Door
    Increasing the storage efficiency using a proper subsidiary for a perfect insulation.

     

    Unit coolers and room finish
    Covering with galvalume for Indoor ceiling, floor and wall

    Convenient storage, easy cleaning, prevention of corrosion.

    Water proof Lamp inside of container
    Maintain the cleanliness and enhance the elegance of the interior
    Enable to do easy work at the container

    Pressure adjustment valve (indoor ventilator )
    Equipped with Automatic opening and closing valve(emissions for hazardous air such as CO2, ethylene, volatile gas)

    Basement of the floor for refrigeration container
    Reinforced
    to back and forth, side to side so as to transport by forklift
    (Narrow road transport is also available)

    Unit Coolers
    Ultra-low-noise type cooler



    Refrigerated container type.Freezer Specification Chart

    Cold Storage Specification Chart container type(for refrigeration)

     

    Size

    Dimension ( Width*Length*Height)

    Horsepower

    Storage capacity

    20 feet

    2400 * 6000 * 2500 mm

     3 HP

       2100 L

    40 feet

    2400 * 12000 * 2500 mm

     5 HP

       2550 L

     

     

    Cold Storage Specification Chart container type(for freezing)

     

    Size

    Dimension ( Width*Length*Height)

    Horsepower

    Storage capacity

    20 feet

    2400 * 6000 * 2500 mm

     5 HP

       2100 L

    40 feet

    2400 * 12000 * 2500 mm

    10 HP

       2550 L

     


     

     Manufacture plant    E-mail :  j84416@gmail.com

     

    Home I Company I Product I Inquiry Email I